TYPICAL ENQUIRIES GENERATED BY GLOBAL SEMICONDUCTOR FORUM

We are a 8" wafer fabrication foundry. I am interested to know more on the total gas and chemical management. Our contract with current TGM and TCM is expiring soon and now we are looking at other options available in the market.

I am looking for wafer manufacturing equipment (not Fab), a wafer manufacturing production line and fab back-end equipments, including testing and packaging, my company is considering invest these two production lines to china, except the equipments, we also need the consulting service to help us on these two projects. Can you help?

We have a proprietary design of Si lens which requires flip chip bonding to the surface of an InP laser die. This is for a telecom laser transmission product application. The lens is approx 600um (L) x 400um(W0 x 550um (H) and needs to be placed to within <2um with good panarity. The attachment is made by 6 30um dia Au80Sn20 solder pads. We need to complete 200- 300 assemblies in June 2004 and ramp to 5k- 10k/month in 2005. Can you assist?

I'm interested in your heating jackets. We are building a post deposition system and need to heat the outer vacuum chamber to 100- 250 degrees C. I have attached a approximate drawing of the chamber that we would like to heat. Could you send us a quotation for a heating jacket fitted to this chamber. As indicated in the drawing we plan to have a door on the system - is it possible to make the heating jacket so that it is still possible to open the door without removal ?

Could you send please a quotation for the ###### Deep RIE etcher Best Regards, ######

Dear Sir/Mdm, My name is #####, Market Development Manager of ######## is a rep group specialised in serving the semiconductor and Flat Panel Display industries. We cover the territories of Taiwan, Shanghai-China and South East Asia through our 3 offices in Taiwan, 1 office in Shanghai and 1 office in Singapore. Currently, I have a customer in Singapore who is looking for a PECVD system for research and educational purpose. Attached is the technical specification. Pleaseadvise if you can support this application SCOPE : Supply, delivery, installation and commissioning of Plasma Enhanced Chemical Vapor Deposition Equipment

National in Portland Maine - looking for Arriga and Ontrak Series II

Give us the Detail regarding Sintered Silicon Carbide Tubes and Sealring for making Mechanical Seals and Spares used in all types of Pumps.If ready price list is available then please Email to us soon.

I would like to inquire about feasibility of a-Si depositon in the following system: ICP 4-100W 200-250C 10-20sccm of 0.4% SiH4/Ar mixture 20-60 min Thank you for your help

need to get data regarding a vacuum pen ESD safe, with max cup diameter of 3mm. Quotation needed

The information about the model and PRICE of the chip-on-glass technical equipment for LCD repair and rework (including assembly). Thank you! Rework: SMD Rework Flip Chip Rework COG Rework

Please send me specifications / pricing / availability for 300mm wafer wand.

Good Day, I pls need more info on your Linear guides (rails) with the integrated linear encoder. Tks John

Could you please email me (preferably have someone contact me) about the CMP endpoint detection systems?

Dear Sir/Madam, as I understand from a press release XXXXXX is now a supplier of the former Matrix one systems. My company is interessted in buying system 145 or 105 for XXXXXX, thus I am very interested in getting in contact with you to get further information on pricing and maybe refurbished and thus cheaper systems. Kind regards,

We traditionally produce burn-in sockets with stamped contacts, but we are exploring other technologies including compression springs and formed “caps”. We would need 1 to 10 million “caps” per year.
Do you have a process for producing parts in this size? If you do, I need a budgetary tooling and piece part cost.

Dear sirs,

We have a tender for the following:

High Vacuum System Plasma Chamber with the following specifications for High Vacuum Remote Microwave Plasma System. A stainless steel process chamber that would be used to generate plasmas to which a microwave source should be attached.

1. Quartz tube: 45-50mm in diameter where plasma is generated by user provided microwave source (2.4ghz,1.2kw)

2. Stainless steel chamber for plasma expansion and remote plasma studies approx 250mm diameter and 500mm long
3. Ports for:
- Substrate manipulator(CF250/35)
- Vacuum pump(CF IOO)
- MW source with quartz tube sealing (CF250)
- Diagnostic and pressure gauge(8CF 35Ports)
- Capacitance manometer and RGA(2 CF16PORTS)

4. Integration of MW source with Quartz tube

5. Frame to integrate line power,water connection and gas connection

6. Power requirement: 50Hz,220v

Please provide for me a contact for discussing equipment related services in the Pacific Rim Countries. I would like to discuss possible opportunities that we may work together to provide services for our customers.

I am looking for the following for a client in Taiwan:

1. AMAT Mira Mesa tool
2. 676/776 CMP
3. retainer rings

Do you have the below parts?
- Harmonic arm: 853-012123-004
- Arm housing: 853-012100-003
- Autoloder ass'y: ATM204-1-S (Model) 799-092593-002
- Autoloder controller: ESC-100 (Model) 685-092593-001

I just want a quote on your fineplace/optobonder.

I need pricing or a distrubuter for Colorex RD flooring

Hello, Greetings. I am Loga from XXXXXXX North America Sourcing Team. I need your contact details in order for me to send a quote package. Enclosed is the detail of the parts that need your quote. Those fields highlighted in yellow are the mandatory field that need to fill in. Pls do not hesitate to contact me if you have any queries. Appreciate your prompt response.

Hello! Please have your local agent contact us for wafer handling system for microscopic inspection. Thank you.

sourcing for a 6-inch and 8-inch wafer handling cum die inspection system.

DEAR SIRS , PLEASE QOUTE PRICE AND DELIVERY FOR 200 OFF PART 052651 ( LESS COAT ) AND 200 OFF 052652 (LESS COAT) . LAST PURCHASED 1997 WHEN WE WERE ********* - WE ARE NOW PART OF ********** GROUP . LAST P/O 62772C LAST DEL JULY 1997 . HOPE YOU CAN HELP . Regards